Table of Contents
Advertisement
Chapter 2. Installing Pipe Nozzles
2.2 Identifying and Checking the Nozzle Installation Kit Components
The nozzle kit consists of various components which you must identify and check as described in the following
sub-sections.
The Nozzle Installation Kit contains the materials listed below. Use Figure 2 to help identify each component.
•
2 Nozzles
•
2 Welding Bosses
•
1 Jig
•
1 Threaded Rod (1 in. diameter), washer and nut
IMPORTANT:
You will need to supply eight
4
5
/
in. 4.25 in. studs with two nuts each.
8
Nozzle
Welding Boss
Top
Jig
Threaded Rod with Washer and Nut
Figure 2: Components for Nozzle Installation Kit
Top
Side
Side
Model T9 Ultrasonic Flow Transducer Installation Guide
Advertisement
Table of Contents
