Table of Contents
Advertisement
Chapter 3. Inserting T9 Transducers into the Pipe
3.4
Inserting Transducers with the Flanged Holder (cont.)
3.4.1 Securing the Transducers
1. Secure the flanges together by placing the studs, washers and nuts as shown below. Hand-tighten each stud. The
factory recommends using ASTM A193 Grade B7 (or equivalent) studs and ASTM A19 Grade 2H (or equivalent)
nuts.
24
Top View
Top View
Model T9 Ultrasonic Flow Transducer Installation Guide
Advertisement
Table of Contents
