Chapter 30 Access Control
Table 102 SNMP Switch Traps
OPTION
OBJECT LABEL
stp
STPNewRoot
MRSTPNewRoot
MSTPNewRoot
STPTopologyChange
MRSTPTopologyChange
MSTPTopologyChange
mactable
MacTableFullEventOn
MacTableFullEventClear
rmon
RmonRisingAlarm
RmonFallingAlarm
30.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
250
OBJECT ID
1.3.6.1.2.1.17.0.1
1.3.6.1.4.1.890.1.5.8.17.36.2.1 This trap is sent when the MRSTP
1.3.6.1.4.1.890.1.5.8.17.107.7
0.1
1.3.6.1.2.1.17.0.2
1.3.6.1.4.1.890.1.5.8.17.36.2.2 This trap is sent when the MRSTP
1.3.6.1.4.1.890.1.5.8.17.107.7
0.2
1.3.6.1.4.1.890.1.5.8.17.32.2.1 This trap is sent when more than
1.3.6.1.4.1.890.1.5.8.17.32.2.2 This trap is sent when less than
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
DESCRIPTION
This trap is sent when the STP root
switch changes.
root switch changes.
This trap is sent when the MSTP
root switch changes.
This trap is sent when the STP
topology changes.
topology changes.
This trap is sent when the MSTP
root switch changes.
99% of the MAC table is used.
95% of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the variable
falls below the RMON "falling"
threshold.
ES-3148 User's Guide