Switch Access And Login - ZyXEL Communications ES-3148 Series User Manual

Chapter 37 Troubleshooting

37.2 Switch Access and Login

I forgot the IP address for the Switch.
1 The default out-of-band management IP address is 192.168.0.1. The default in-band
management IP address is 192.168.1.1.
2 Use the console port to log in to the Switch.
3 Use the management port to log in to the Switch. Use the out-of-band management IP
address.
4 If this does not work, you have to reset the Switch to its factory defaults. See
on page
I forgot the user name or password.
1 The default user name is admin, and the default password is 1234. These fields are case-
sensitive, so make sure [Caps Lock] is not on.
2 If this does not work, you have to reset the Switch to its factory defaults. See
on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default out-of-band management IP address is 192.168.0.1.
• The default in-band management IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
Section 3.3 on page
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the Switch. (If you know that there are
routers between your computer and the Switch, skip this step.)
5 Try to access the Switch using another service, such as Telnet. If you can access the
Switch, check the remote management and secure client settings to find out why the
Switch does not respond to HTTP.
6 Reset the Switch to its factory defaults, and try to access the Switch with the default IP
address. See
284
59.
59.
(Section 7.6 on page
I forgot the IP address for the Switch.
47.
Appendix B on page
Section 4.6 on page
79), use the new IP address.
317.
59.
Section 4.6
Section 4.6
ES-3148 User's Guide