Chapter 4 The Web Configurator
Table 5 Web Configurator Screen Sub-links Details (continued)
BASIC SETTING
The following table describes the links in the navigation panel.
Table 6 Navigation Panel Links
LINK
Basic Setting
System Info
General Setup
Switch Setup
IP Setup
Port Setup
Advanced
Application
VLAN
Static MAC
Forwarding
56
ADVANCED
APPLICATION
Authentication and
Accounting
RADIUS Server
Setup
TACACS+ Server
Setup
Auth and Acct
Setup
IP Source Guard
IP Source Guard
Static Binding
DHCP Snooping
DHCP Snooping
Configure
DHCP Snooping
Port Configure
DHCP Snooping
VLAN Configure
ARP Inspection
Status
ARP Inspection
VLAN Status
ARP Inspection Log
Status
ARP Inspection
Configure
ARP Inspection Port
Configure
ARP Inspection
VLAN Configure
Loopguard
DESCRIPTION
This link takes you to a screen that displays general system and hardware
monitoring information.
This link takes you to a screen where you can configure general identification
information about the Switch.
This link takes you to a screen where you can set up global Switch parameters
such as VLAN type, MAC address learning, GARP and priority queues.
This link takes you to a screen where you can configure the management IP
address, subnet mask (necessary for Switch management) and DNS (domain
name server).
This link takes you to screens where you can configure settings for individual
Switch ports.
This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup menu). You can also
configure a protocol based VLAN or a subnet based VLAN in these screens.
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
IP APPLICATION
MANAGEMENT
ES-3148 User's Guide