Dhcp Snooping Configure; Figure 103 Advanced Application > Ip Source Guard > Dhcp Snooping > Configure; Table 74 Advanced Application > Ip Source Guard > Dhcp Snooping > Configure - ZyXEL Communications ES-3148 Series User Manual

Chapter 24 IP Source Guard

24.5 DHCP Snooping Configure

Use this screen to enable DHCP snooping on the Switch (not on specific VLAN), specify the
VLAN where the default DHCP server is located, and configure the DHCP snooping database.
The DHCP snooping database stores the current bindings on a secure, external TFTP server so
that they are still available after a restart. To open this screen, click Advanced Application >
IP Source Guard > DHCP Snooping > Configure.
Figure 103 Advanced Application > IP Source Guard > DHCP Snooping > Configure
The following table describes the labels in this screen.
Table 74 Advanced Application > IP Source Guard > DHCP Snooping > Configure
LABEL
Active
DHCP Vlan
208
DESCRIPTION
Select this to enable DHCP snooping on the Switch. You still have to
enable DHCP snooping on specific VLAN and specify trusted ports.
Note: The Switch will drop all DHCP requests if you enable
DHCP snooping and there are no trusted ports.
Select a VLAN ID if you want the Switch to forward DHCP packets to
DHCP servers on a specific VLAN.
Note: You have to enable DHCP snooping on the DHCP
VLAN too.
You can enable Option82 in the DHCP Snooping VLAN Configure
screen (Section 24.5.2 on page
between DHCP requests from different VLAN.
Select Disable if you do not want the Switch to forward DHCP packets to a
specific VLAN.
211) to help the DHCP servers distinguish
ES-3148 User's Guide