Advertisement
INSTALLATION
Divider Fit
Standard QTM-ELED power supply.
1.
To fit the QTM in the QOM housing, the divider plate must be
3.
modified. Cut the divider plate with metal shears along the
perforated line.
ISO View
The modified power tray will fit in
4.
the QOM housing
Tray Front View
LED DRIVER 1
(120V - 277V)
TOP TRAY
BOTTOM TRAY
SECONDARY
Divider Plate
● For QOM to QTM no modification is required. Uninstall QOM power tray and install in QTM housing.
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Front View
LED DRIVER 1
LED DRIVER 2
(120V - 277V)
(120V - 277V)
TOP TRAY
BOTTOM TRAY
SECONDARY
PRIMARY
Divider Plate
QOM Housing
LED DRIVER 2
(120V - 277V)
PRIMARY
LED POWER SUPPLY - QOM-eLED+IA
Remove power tray from housing. Unscrew from 4 locations.
2.
QTM Housing
Screw tray to housing in 4 locations.
5.
Front View
LED DRIVER 1
(120V - 277V)
TOP TRAY
BOTTOM TRAY
SECONDARY
Divider Plate
Tray Front View
LED DRIVER 1
LED DRIVER 2
(120V - 277V)
(120V - 277V)
TOP TRAY
BOTTOM TRAY
SECONDARY
PRIMARY
Divider Plate
ISO View
Divider Plate
LED DRIVER 2
(120V - 277V)
PRIMARY
Specification subject to change. Rev-09-29-20
Advertisement
