Advertisement
19
9
R a il a s s e m b ly s te p s
6b. Fig. 19 show s the continuation
of fg. 18: Continued section
starts behind the trav erse loops
and ends at the low er elev ator
entry (fg. 19)
20
7. From upper elev ator ex it (start)
to the junction B entry (end):
Install 2 x 235cm rails (fg.
20-1)
8. From junction B to the upper
seesaw : Install 2 x 96cm rails
(fg. 20-2)
9. From low er seesaw (start)
to the m iddle elev ator entry:
Install 2 x 80cm rails (fg. 21-1)
10. From junction B (start) to the
m iddle elev ator entry (end):
Install 2 x 142cm rails (fg. 22
+ 22-1)
From upper elev ator ex it (start) to the junction B entry
20-1
Install 2 x 235cm rails (fg. 20-1)
22
19-1
Fig. 19 + 19-1 show the continuation of fg. 18
Junction B
From junction B to the upper seesaw
20-2
Install 2 x 96cm rails (fg. 20-2)
Junction B
22-1
Assembly of rails
21
From low er seesaw (start) to the m iddle elev ator entry
21-1
Install 2 x 80cm rails (fg. 21-1)
Insert rail stand at the end of the rail to
ensure best seesaw stability
20-3
Correct assem bly of seesaw (fg. 20-3)
11
Advertisement
