Controls And Indicating Elements - IFM Electronic efector 160 LK81 Series Operating Instructions Manual

Controls and indicating elements

1
2 x LED green
2
4 x LED yellow
4-digit
alphanumeric
3
display
Set
4
pushbutton
Mode / Enter
5
pushbutton
1
2
Mode/Enter Set
Lighting LED = set display unit:
- LED 1 = level in cm.
- LED 2 = level in inch.
Switching status indication; lights if the respective
output is switched.
- LED 1 = OUT1 (freely configurable output).
- LED 2 = OUT2 (freely configurable output).
- LED 3 = OUT3 (freely configurable output).
- LED 4 = OUT-OP (overflow protection).
- Indication of the current level.
- Operating and fault indication.
- Indication of the parameters and parameter
values.
- Setting of the parameter values (scrolling by
holding pressed; incremental by pressing briefly).
Selection of the parameters and menu points,
acknowledgement of the parameter values.
3
4
5
25