Table of Contents
Advertisement
Industrial Electronic Devices
CHARACTERISTICS:
The HD67B18-B2 is a OPC UA Client / KNX converter.
It allows the following characteristics:
Up to 1500 bytes in reading and 1500 bytes in writing;
Two-directional information between KNX and OPC UA;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8...24V AC or 12...35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67B18 software on your PC in order to perform the following:
Define the parameter of OPC UA;
Define the parameter of KNX line;
Define the list of OPC UA servers connected to the converter;
Define the list of KNX objects accessible on KNX side;
Update the device.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual OPC UA Client / KNX
Document code: MN67B18_ENG
Revision 1.000
INFO:
www.adfweb.com
Page 6 of 30
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67B18-B2 and is the answer not in the manual?
Questions and answers