Table of Contents
Advertisement
User Manual OPC UA Client / KNX
Document code: MN67B18_ENG
Revision 1.000
Page 12 of 30
Industrial Electronic Devices
USE OF COMPOSITOR SW67B18:
To configure the Converter, use the available software that runs with Windows called SW67B18. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67B18, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67B18
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67B18-B2 and is the answer not in the manual?
Questions and answers