Table of Contents
Advertisement
Wiring Diagram (WIREMAP) test function:
When the wiring diagram, (WIREMAP), test function is selected, the tester will carry
out a wiring diagram (WIREMAP) test and displays the following information while
the check is being carried out:
Test 1: Short Circuit (SHORT)
If there is a short circuit on the cable or terminal, it will be shown on the display.
For example, if the test found 12 short circuits the display would appear as shown
below:
Press the p or q key to restart the test or press the 'PAIR&L' key to return to the
main menu.
Always correct a short circuit fault first and then start further test measurements.
Test 2: Far-end matcher (ID) is not found or the cable is not inserted in local
port (L):
The LAN Network Cable Tester will automatically detect the far-end matcher (ID) or
local port (L) cable. See the image below if the far-end of the cable being checked is
not inserted into the far-end matcher (ID) or if the cable is not inserted into the local
port (L) in a local test:
Press the p or q key to restart the test or press the 'PAIR&L' key to return to the
main menu.
6
Advertisement
Table of Contents
