Table of Contents
Advertisement
Technical Specification
Overall Dimension
Power Supply
Display
Type of test Cable
Working Ambient Temp.
Tester Port
Twin Twisted Cable Length
Calibration Accuracy
Shipment Accuracy
Display
Length Calibration
Wire Sequence and Locating
Cable Error
Locating Cable
Automatic Time-Delay Shut Off Time
180 x 80 x 40mm.
4 x 1.5V Size AA batteries with power consumption
16mA. (Included)
Special 4 x 16 character big screen LCD
lattice (valid visual field 61.6 x 25.2mm).
STP/UTP twin twisted cable. Coaxial cable, telephone
line.
-10⁰ C to + 60⁰ C.
Test RJ45 master port (M), test LOOPBACK RJ45 port
(L), far-end Recogniser RJ45 port (R). The BNC and
RJ11 adaptor accessories can be used to measure and
check the continuity of coaxial cable and telephone
lines.
Scope: 1 - 350m, (3 - 1,200ft)
3% (+/- 0.5m or +/- 1.5ft) (calibrating cable >5m)
5% (+/- 0.5m or +/- 1.5ft) (AMP, AT&T Class 5 cable)
Meters or feet.
The user can set the calibration factor with a given
length of cable. The length of the calibrating cable
should be more than 5m.
Check errors such as open circuit, short circuit, reverse
connection, cross-over or cross-talk interference.
8 far-end passive test jacks (ID 1 ≥ ID 8)
30 minutes
14
Advertisement
Table of Contents
