Triax 157011 Operating Manual page 2

Safety and Disposal
The LAN Network Tester operates off 6V DC only.
Only use the internal, battery powered, 6V power supply to power the LAN Network
Tester. Never connect or use any other power supply to power up the LAN Network
Tester otherwise damage to the tester may result or test results could be affected.
Ensure that the batteries are correctly inserted.
Refer to the polarity symbols within the battery compartment.
To ensure efficient use and increase battery life, the LAN Network Tester will
automatically switch off following 30 minutes of inactivity.
Disposal: For proper treatment, recovery and recycling, please take this product,
(including any used batteries), to designated collection points.
1