Encapsulation And Multiplexing Scenarios; Figure 4-2 Menu 11.1 - Remote Node Profile - ZyXEL Communications Prestige 782R User Manual

Prestige 782R G.SHDSL Router

4.1.2 Encapsulation and Multiplexing Scenarios

For Internet access you should use the encapsulation and multiplexing methods used by your ISP. For
LAN-to-LAN applications, e.g., branch office and corporate headquarters, prior agreement on methods is
necessary because encapsulation and multiplexing cannot be automatically determined. Which methods to
use depends on how many VCs you have and how many different network protocols you need. The extra
overhead that ENET ENCAP encapsulation entail makes them a poor choice in a LAN-to-LAN application.
Here are some examples of more suitable combinations in such an application.
Scenario 1. One VC, Multiple Protocols
PPP (RFC-2364) encapsulation with VC-based multiplexing is the best combination because no extra
protocol identifying headers are needed. The PPP protocol already contains this information.
Scenario 2. One VC, One Protocol (IP)
Selecting RFC-1483 encapsulation with VC-based multiplexing requires the least amount of overhead (0
octets). However, if there is a potential need for multiple protocol support in the future, it may be safer to
select PPP encapsulation instead of RFC-1483, so you do not need to reconfigure either computer later.
Scenario 3. Multiple VCs
If you have an equal number (or more) of VCs than the number of protocols, then select RFC-1483
encapsulation and VC-based multiplexing.
Rem Node Name= nodename
Active= Yes
Encapsulation= RFC-1483
Multiplexing= LLC-based
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Press Space Bar to Toggle.
4-2
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Figure 4-2 Menu 11.1 – Remote Node Profile
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Edit ATM Options= No
Session Options:
Edit Filter Sets= No
Remote Node Configuration