Prestige 782R G.SHDSL Router
8.3.3 Novell IPX Filter Rule
This section shows you how to configure an IPX filter rule. IPX filters allow you to base the rules on the
fields in the IPX headers.
To configure an IPX rule, select IPX Filter Rule from the Filter Type field and press [ENTER] to open
Menu 21.1.1 – IPX Filter Rule, as shown in the next figure.
Press Space Bar to Toggle.
The following table describes the IPX Filter Rule.
8-12
Menu 21.1.1 - IPX Filter Rule
Filter #: 1,1
Filter Type= IPX Filter Rule
Active= No
IPX Packet Type=
Destination: Network #=
Node #=
Socket #=
Socket # Comp= None
Source: Network #=
Node #=
Socket #=
Socket # Comp= None
Operation= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Figure 8-9 Menu 21.1.1 – IPX Filter Rule
Log= None
Filter Configuration