Zero Configuration - ZyXEL Communications Prestige 2602R Series Quick Start Manual

• Web Configurator Internet Access Wizard
You will need your Internet access information such as user name and password if given by your ISP.
ISP INFORMATION
None
An IP address only
A user name and password (and an IP address)
An IP address, subnet mask and a gateway IP
address

2.1 Zero Configuration

Launch your web browser and navigate to any web
site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet
connection. This may take about two minutes.
If you have a PPPoE or PPPoA
connection, a screen displays
prompting you to enter your
Internet account information.
Enter the username, password
and/or service name exactly as
provided. Click Apply.
Note: Zero Configuration can only automatically configure the device for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address
from your ISP.
If you're not using these Internet access settings, then use the web configurator Internet Access
Wizard to manually configure the device.
If you want to set up a SIP account for VoIP calls, you should also configure the voice
configuration wizard screen (see
Setup.
Prestige 2602R Series Quick Start Guide
ENCAPSULATION METHOD YOU ARE USING
RFC1483 in bridged mode with a dynamic IP address or
ENET ENCAP with a dynamic IP address
RFC1483 in routing mode with a static IP address
PPPoA or PPPoE encapsulation (with a static IP address)
ENET ENCAP with a static IP address
Section 2.2.2 on page 6
4
) or the Voice screen under Advanced