Table of Contents
Advertisement
• Web Configurator Internet Access Wizard
2.1 Zero Configuration
Launch your web browser and
navigate to any web site (for
example, www.zyxel.com). The
Prestige automatically detects
and configures your Internet
connection. This may take about
two minutes.
If you have a PPPoE or PPPoA
connection, a screen displays
prompting you to enter your
Internet account information.
Enter the username, password and/or service name exactly as provided. Click Apply.
Note: Zero Configuration can only automatically configure the device for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address
from your ISP. If you're not using these Internet access settings, then access the web
configurator and use the wizard screens (see the following section) to configure your settings.
You also need to use the wizard screens if you want to configure the Prestige for making Internet
calls.
2.2 Web Configurator Access
1 Launch your web browser. Enter 192.168.1.1 as
the web site address.
Note: If you do not see the next screen, then
please read
Section 3.1 on page 12
2 Click Login (the default password 1234
is already entered).
Prestige 2602HW Series Quick Start Guide
.
3 Type a new
password
(retype it to
confirm) and
click Apply.
You then see
the main web
configurator
screen
5
Advertisement
Table of Contents
