ZyXEL Communications Prestige 2602R Series Quick Start Manual page 7

ENET ENCAP
A) Select Routing, then ENET
ENCAP
.
B) Click Next.
C) If your ISP gave you an IP
address, subnet mask and
a gateway address, select
Static IP address and
enter them. Otherwise,
select Obtain IP Address
Automatically.
D) Select SUA Only if you
have one public IP
address, Full Feature if
you have more than one
public IP address (for
translation) or None to
disable NAT.
E) Click Next.
PPPoE
A) Select Routing, then
PPPoE.
B) Click Next.
C) Enter the service name,
username and password
given by your ISP.
D) If your ISP gave you an IP
address, select Static IP
address and enter it.
Otherwise, select Obtain IP
Address Automatically.
E) Select Nailed-Up
Connection to have your
connection up all the time.
Otherwise, select Connect
on Demand and specify an
idle time-out period (in
seconds) in the Max. Idle Timeout field.
F) Select SUA Only if you have one public IP address, Full Feature if you have more than one public IP
address (for translation) or None to disable NAT.
G) Click Next.
Prestige 2602R Series Quick Start Guide
A
B
A
7
C
C
D
B
E
D
E
F
G