Sony DSR-2000A Service Manual page 114

2 2
2 2 DV 2
1. Select the EQ AUTO ADJ.
2. Move the cursor displayed with a white background to the DV
using the [AUDIO|IN] (↑) and [IN] (↓) keys and press the
[ENTRY] (→) key.
3. After the monitor display comes out as shown right, insert the
XH4-1A into the unit.
4. Press the [PLAY] key.
5. Confirm "COMPLETE" is displayed on the monitor.
To return to step 2, press the [DELETE] (←) key once.
To return to step 1, press the [DELETE] (←) key twice.
To return to the main menu, press the [DELETE] (←) key three
times.
In the case of trouble :
If "INCOMLETE" is displayed on the monitor;
1 Send the small length of the tape forward and repeat step 2
again.
2 If "INCOMLETE" is still displayed after performing 1,
check the RP-111 board (the EQ circuit).
5-32 DSR-2000A/2000AP