Advertisement
Before beginning the installation process, please read this installation manual completely,
including the important safety instructions.
,PSRUWDQW6DIHW\,QVWUXFWLRQV
SAVE THESE INSTRUCTIONS - This installation manual contains important instructions that
should be followed during the installation of Magne Charge™ Inductive Charger Model WM7200.
Carefully read these instructions before installing this charger.
The following symbols may be found in this manual or on labels affixed to this charger.
This symbol warns you of the presence of dangerous voltages and a high risk of
electrical shock. To help avoid death or serious injury, follow these instructions.
DANGER
This symbol warns you of other risks of injury. To help avoid serious injury,
follow these instructions.
WARNING
This symbol alerts you to other important installation instructions. Follow these
NOTICE:
instructions to help avoid damage to the charger and to help assure proper
operation.
Note to Installer: Make certain you leave these instructions with the owner of this unit.
Note to Owner: Keep these instructions for your Magne Charge™ Sales and Service
Representative to reference in the future.
The Inductive Charger Model WM7200 should only be installed by an authorized electrician in
accordance with all local electrical codes and ordinances and the instructions contained in this
installation manual. Before beginning the installation process, please read this installation manual
completely, including the important safety instructions.
Disconnect the power to the charger branch circuit at the service panel and verify that
high voltage is not present on utility wiring prior to installation.
Danger
1
Advertisement
