Waste Disposal And Environmental Protection; Technical Data; Guarantee - Grizzly EHS 500 T Instructions For Use Manual

Waste Disposal and Envi-
ronmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
• Take the equipment to a waste dis-
posal site. The plastic and metal parts
that are used can be separated out
into pure grade, which allows recycling.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.

Technical Data

Telescopic Handled
EHS 500 T
Input voltage rating .....230-240 V~, 50 Hz
Input power .....................................500 W
Blade speed............................. 1500 min
Safety class .......................................
Degree of protection
Weight (without cable) .................... 4.2 kg
Length of blades .......................... 450 mm
Cutting length .............................. 410 mm
Cutting capacity ............................. 18 mm
Acoustic pressure level
(L ) ......... 86.52 dB(A); K
pA
Sound power level (L
measured .. 96.33 dB(A); K
guaranteed ...............................98 dB(A)
Vibration (a )
n
at the handle ........................ 1.212 m/s
at the additional handle ........ 0.848 m/s
Hedge Trimmer
.........................IP 20
=1,28 dB(A)
pA
)
wA
=1.28 dB(A)
wA
K=1,5 m/s
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. Technical and optical
changes may be undertaken in the course
of further development without notice. All
dimensions, references and information in
this instruction manual are therefore not
guaranteed. Legal claims made on the ba-
sis of the instruction manual can therefore
not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission value
may differ during actual use of the power
tool from the stated value depending
on the manner in which the power tool
is used. Safety precautions aimed at
protecting the user should be based on
estimated exposure under actual usage
conditions (all parts of the operating cycle
are to be considered, including, for ex-
ample, times during which the power tool
-1
II is turned off and times when the tool is
turned on but is running idle).

Guarantee

• This appliance has a 24-month guar-
antee. Commercial use will invalidate
the guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain components
are subject to normal wear and tear and
are excluded from the guarantee. These
2
include in particular: cutter bars, eccen-
2
tric drives and carbon brushes.
2
• Furthermore, the prerequisite for guar-
GB
27