Menu 2 Wan Backup Setup; Introduction To Wan Backup Setup; Configuring Dial Backup In Menu 2; Figure 100 Menu 2 Wan Backup Setup - ZyXEL Communications P-660H-D Series User Manual

Menu 2 WAN Backup Setup

This chapter describes how to configure traffic redirect and dial-backup using menu 2 and 2.1.

20.1 Introduction to WAN Backup Setup

This chapter explains how to configure the Prestige for traffic redirect and dial backup
connections.

20.2 Configuring Dial Backup in Menu 2

From the main menu, enter 2 to open menu 2.

Figure 100 Menu 2 WAN Backup Setup

The following table describes the fields in this menu.
Table 73 Menu 2 WAN Backup Setup
FIELD
Check Mechanism
Check WAN IP
Address1-3
Chapter 20 Menu 2 WAN Backup Setup
Menu 2 - Wan Backup Setup
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 0
Recovery Interval(sec) = 0
ICMP Timeout(sec) = 0
Traffic Redirect = No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then press [ENTER] to select the method that the
Prestige uses to check the DSL connection.
Select DSL Link to have the Prestige check the DSL connection's physical
layer. Select ICMP to have the Prestige periodically ping the IP addresses
configured in the Check WAN IP Address fields.
Configure this field to test your Prestige's WAN accessibility. Type the IP
address of a reliable nearby computer (for example, your ISP's DNS server
address). When using a WAN backup connection, the Prestige periodically
pings the addresses configured here and uses the other WAN backup
connection (if configured) if there is no response.
P-660R/H-D Series User's Guide
C
H A P T E R
2 0
196