ZyXEL Communications P-660HW-Dx v2 Quick Start Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Gateway
  5. P-660HW-DX V2 - V3.40
  6. Quick start manual
ZyXEL Communications P-660HW-Dx v2 Quick Start Manual

ZyXEL Communications P-660HW-Dx v2 Quick Start Manual

802.11g wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HW-Dx v2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
P-660HW-Dx v2
802.11g Wireless ADSL2+ 4-port Gateway

Quick Start Guide

Version 3.40
3/2007
Edition 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-660HW-Dx v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZyXEL Communications P-660HW-Dx v2

Summary of Contents for ZyXEL Communications P-660HW-Dx v2

  • Page 1: Quick Start Guide

    P-660HW-Dx v2 802.11g Wireless ADSL2+ 4-port Gateway Quick Start Guide Version 3.40 3/2007 Edition 1...
  • Page 2 The P-660HW-Dx v2 is a wireless ADSL router with a four-port built-in switch. This Quick Start Guide shows you how to use the P-660HW-Dx v2 to connect to the Internet and how to configure the device settings to connect wirelessly.

  • Page 3: Hardware Connections

    1 Hardware Connections 1 DSL: Use the gray telephone wire to connect your P-660HW-Dx v2’s DSL port to a telephone jack (or to the modem port on a splitter if you are using one). 2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET port for initial configuration and/or Internet access.

  • Page 4: Internet And Wireless Setup Wizard

    • The DSL light is on when the P-660HW-Dx v2 has a DSL connection. • The INTERNET light is on when you are able to access the Internet and blinks when the P-660HW-Dx v2 is sending or receiving data. Wait a couple of minutes while your device checks the connection.
  • Page 5 4 Connecting to the Internet Using the Wizard Use this wizard if you could not automatically connect to the Internet in section 2. The first step of the Internet/Wireless Setup Wizard connects your P-660HW-Dx v2 to the Internet. 1 Click INTERNET/WIRELESS SETUP to start the wizard.

  • Page 6: Configuring Your Wireless Settings

    To create a wireless network, the P-660HW-Dx v2 and your wireless computer must all use the same SSID (network name), channel and security settings. If you do not set wireless security then anyone within range could use your P-660HW-Dx v2 to access your network and the Internet.
  • Page 7 2 Configure your wireless settings in the screen. Click Next. 3) If you select either WEP or WPA-PSK security (recommended), then follow the directions to enter the appropriate key. Click Next to continue and Apply to save your wireless LAN settings. P-660HW-Dx v2 Quick Start Guide...
  • Page 8 2 Select Go to Advanced setup. Then, click Apply. 3 The Status screen appears. Click Network > WAN in the navigation panel on the left of the screen. 4) Enter the information exactly as provided by your ISP. Click Apply. P-660HW-Dx v2 Quick Start Guide in section 3.)
  • Page 9 If you select Disable wireless security using the wireless wizard, the P-660HW-Dx v2 will create a WPA-PSK automatically. If you select Manually assign a WEP key using the wireless wizard, the P-660HW-Dx v2 will replace the WEP key with a WPA-PSK.

  • Page 10: Troubleshooting

    7.2 Enabling OTIST To enable OTIST on the P-660HW-Dx v2, you can either use the wizard (see section 3) or hold in the RESET button (see section 1) for about three seconds. Do not hold the RESET button in for too long, as this will reset the P-660HW-Dx v2 to the factory defaults.
  • Page 11 DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP address directly. If you want to access the P-660HW-Dx v2 again, you need to use a static IP address in the same subnet as your P-660HW-Dx v2 (the P-660HW-Dx v2’s default IP address is http://192.168.1.1).

This manual is also suitable for:

P-660hw-d1 v2

Table of Contents