Activating The Alarm Function - Silvercrest SWED 100 A1 User Manual And Service Information

 Now press the "TIME/MEM" button (14). The display flashes to indicate
that you can set the relevant hour. Set the hour by pressing the "UP" (9)
or "DOWN" (11) buttons. You can also keep the buttons pressed to
speed up the progress of the numbers. Confirm your selection by
pressing the "TIME/MEM" button (14).
 The display now flashes to indicate that you can set the relevant
minutes. Set the minutes by pressing the "UP" (9) or "DOWN" (11)
buttons. You can also keep the buttons pressed to speed up the
progress of the numbers. Confirm your selection by pressing the
"TIME/MEM" button (14).
 Finally, you can choose to be woken by the radio or buzzer by pressing
the "UP" (9) or "DOWN" (11) buttons. Choose "RAD" for radio or
"BUZ" for buzzer. Confirm your selection by pressing the "TIME/MEM"
button (14).
The alarm time has now been set.

Activating the alarm function

When you have set the desired alarm time, you can activate the alarm
function as follows:
 Briefly press the "ALARM" button (10) when the device is switched off.
The set alarm time is indicated briefly, the "ALARM" symbol (27)
appears on the display and the alarm is activated.
 The device automatically switches itself on at the set alarm time with the
last established frequency and the last tuned frequency band. If you
have chosen the "BUZ" alarm time setting, however, you will be woken
by the buzzer.
SilverCrest SWED 100 A1
English - 25