Activating / Deactivating The Alarm; Replacing Batteries - Silvercrest Z31436 Operation And Safety Notes

Briefly press the MIN button
display little by little.
Note: neither the hour nor the minutes can be rewound.
Once the highest value has been reached the numbers
will restart.
Note: holding the HOUR or MIN button will continu-
ously increase the display.
Once the desired time has been set, release the ALARM
button.

Activating / Deactivating the alarm

Press the AL ON button
The alarm symbol
the alarm is activated. At the set time an audio signal
will now sound for 3 minutes.
Press the AL ON button to switch the audible signal off.

Replacing batteries

The radio does not feature a visual low battery indicator.
However, if the radio reception begins to fade the batteries
need to be replaced. Follow these steps:
to increase the minute
10
to switch the alarm on or off.
9
will appear in the display when
3
GB 13