Polaris RIDE COMMAND User Manual page 53

DEMONSTRATION MODE
When the vehicle is first keyed on, and the shift lever is in the Park (P) position
with the engine not running, the SCM will enter a demonstration mode. The
suspension will react to the operator inputs as if the vehicle was being driven.
After a period of time (5 minutes), the SCM will exit demonstration mode and
stop driving the shocks to conserve vehicle power. The vehicle will enter normal
operation if the engine is started.
The vehicle will enter demonstration mode any time the shift lever is in the park
position (P), the engine speed is at 0 rpm, and the vehicle speed is at 0 mph.
Demonstration mode will time out after 5 minutes.
Demonstration mode exaggerates responses for the purpose of
demonstration. Actual usage requires real speed and dynamic events to illicit
DYNAMIX™ ACTIVE SUSPENSION
the same visual response in the interface.
NOTICE
NOTICE
51