Polaris RIDE COMMAND User Manual page 48

DYNAMIX™ ACTIVE SUSPENSION
DYNAMIX™ SYSTEM COMPONENTS
SUSPENSION CONTROL MODULE (SCM)
The Suspension Control Module (SCM) contains the logic for suspension con-
trol, including communications, operator inputs, and shock drivers. The SCM al-
so has an internal 6-axis inertial measurement unit which is used to monitor the
performance of the vehicle by the suspension control algorithms.
CAUTION
Moving or altering the SCM may have an adverse effect on vehicle handling.
Never move the SCM from it's factory mounting location.
ELECTRONIC POWER ASSISTED STEERING
(EPAS)
The Electronic Power Assisted Steering (EPAS) system has been enhanced with
a steering angle sensor to provide steering angle information to the SCM.
DYNAMIX™ SYSTEM FEATURES
VEHICLE SPEED SENSITIVITY
The system continuously monitors the speed of the vehicle and adjusts to a
base level of damping for a given vehicle speed depending on the mode
selected by the user.
CORNERING CONTROL
The system continuously monitors steering angle, lateral acceleration, and
vehicle yaw rate to provide enhanced cornering control, reducing body roll for
maximum performance.
BRAKING
The system continuously monitors the
brake pedal position and vehicle
deceleration rate, reducing body
motion, and increasing available
compression travel for braking into
harsh terrains.
46