Polaris RIDE COMMAND User Manual page 29

7. Once the display says connected/paired, your phone is now connected to the
display via Bluetooth. After a phone is connected, the Device Manager
Screen will appear.
8. When a smartphone is connected to the display via Bluetooth, users are able
to make phone calls from the display through the keypad, recent calls, or
their contacts by pressing the phone icon in the device manager screen or
through the pull down menu.
There is no built in microphone in the display. Phone call audio will play
through the phone speakers or Polaris approved headset if connected. Some
dial options may be unavailable at speeds greater than 3 MPH.
CONNECTING YOUR BLUETOOTH HEADSET WITH THE
DISPLAY
The Display can connect with Polaris approved Bluetooth headsets to listen to
music, take phone calls, and talk with other riders.
To connect your Bluetooth Heaset to your display, do the following:
1. From the Device Manager menu press "Add Device."
2. Turn your Bluetooth headset on and put it in phone pairing mode.
3. When your Bluetooth headset appears on the display press the "+" icon on
the display. Once your headphones are connected you will see the headset
icon in the upper left-hand corner of the display screen.
FEATURES AND CONTROLS
NOTE
27