Polaris RIDE COMMAND User Manual page 38

FEATURES AND CONTROLS
PLOW MODE (IF EQUIPPED)
Plow Mode is an automated plow control system based on vehicle gear position.
Plow Mode is a feature available for use with RANGER XP 1000 vehicles that
have a factory installed Ride Command System with a winch and auto stop
winch fairlead as part of the factory wiring harness.
To enable Plow Mode, do the following:
1. On the display, go to "Settings," "Vehicle," and then select "Plow Installed."
2. From the Plow installed screen, move the toggle switch from "No" to "Yes."
The procedure above is only required one time. The system will remember
your settings for future use. If you want to disable seeing the plow mode
screen as part of the gauges screen option, you can set the toggle back to "No"
36
NOTE
NOTE
at a later date.