Polaris RIDE COMMAND User Manual page 40

FEATURES AND CONTROLS
AUTO PLOW MODE
Automatic Mode allows the display to automatically lower the plow when you
shift to Low and will automatically raise the plow when you shift to Reverse.
To switch to AUTO plow mode, the
system requires the following conditions
to be met:
1. Plow must be fully up and the
autostop fairlead must be detecting
the rubber stopper.
2. Gear Position must be in Park
3. The Winch in and Winch out relays
must be in place in the fusebox
(factory installed)
Auto-plow mode will be disabled if excessive speed is detected.
BACK DRAG MODE
Automatic Mode must be selected to allow selection of Back Drag Mode.
Back Drag Mode reverses the normal mode operation. When Back Drag Mode
is selected, shifting to REVERSE will lower the plow and shifting to LOW will
raise the plow automatically. To engage Back Drag Mode, press the "Back Drag
Mode" button on the Ride Command display.
38
NOTE
NOTE