Polaris RIDE COMMAND User Manual page 22

FEATURES AND CONTROLS
DRIVE MODE
The vehicle's current drive mode is displayed in the upper-left hand corner.
DRIVE
MODE
Two Wheel
Drive
All-Wheel
Drive
Turf Mode (if
equipped)
SPEEDOMETER
The speedometer display vehicle's speed in either miles per hour (MPH) or
kilometers per hour (km/h).
TACHOMETER
The tachometer displays engine speed in revolutions per minute (RPM).
20
DESCRIPTION
When the switch is on 2X4, the ATV is in two-
wheel drive at all times.
When in All-Wheel Drive, the demand drive
unit will automatically engage any time the
rear wheels lose traction. When the rear
wheels regain traction, the demand drive unit
will automatically disengage. There is no limit
to the length of time the vehicle may remain
in 4X4. The vehicle automatically engages
4X4 when operating in reverse if the switch is
set to 4X4 position.
When operating in TURF mode, the inside
rear wheel will rotate independently from the
outside wheel during turns. Operate in TURF
mode only as needed to protect smooth,
level surfaces from tire damage. DO NOT
operate in TURF mode when climbing or
descending hills, when sidehilling, or when
operating on uneven, loose, or slippery
terrain such as sand, gravel, ice, snow,
obstacles, and water crossings. Always
operate in AWD on these types of terrain.
INDICATOR