Sample Rate; Standby And Deep Sleep; Surface And No-Fly Time - Suunto EON CORE 2.0 User Manual

Suunto EON Core
If the deep stop depth is 15.2 m (49.8 ft), the calculation starts at 15.7 m (51.5 ft) and stops at
12.2 m (40.0 ft). The deep stop window is +/- 1.5 m (4.9 ft) and when the diver is within the
deep stop window, it is indicated with two white arrows pointing at each other on the display.
When the diver ascends above the deep stop window ceiling - in this case above 14.2 m (46.5
ft) - a downward pointing yellow arrow signals that the depth is not optimal, it is
recommended to descend. The deep stop target depth number also turns yellow.
If the diver keeps ascending, after 0.5 m (1.6 ft), a downward pointing red arrow and an alarm
notifies the diver to descend immediately. The deep stop calculation keeps running for
another 1.5 m (4.9 ft) up but stops after that. In the above example it stops at 12.2 m (40.0 ft).
NOTE: For safety reasons, you cannot switch off deepstops if helium (trimix gas
mixtures) is enabled for the dive mode in use.

3.29. Sample rate

Suunto EON Core uses a fixed sample rate of 10 seconds for all log recordings.

3.30. Standby and deep sleep

Standby and deep sleep are two functions that are designed to prolong battery life. Standby
is an adjustable setting that turns off the screen after a set amount of time to save battery if
Suunto EON Core is not used.
To adjust the standby time:
1. Keep the middle button pressed to enter the menu.
2. Browse to General » Device settings » Standby.
3. Press the middle button to enter Standby.
4. Scroll up/down to select the desired standby time in minutes.
5. Press the middle button to save changes and return to the Device settings menu.
6. Keep the middle button pressed to exit.
Deep sleep
Deep sleep is a function that prolongs battery life when Suunto EON Core has not been used
for some time. Deep sleep is activated when two days have passed since:
No buttons have been pressed
•
Dive calculation has ended
•
Suunto EON Core wakes up when it is connected to a PC/charger, when a button is pressed,
or when the water contact gets wet.

3.31. Surface and no-fly time

After a dive, Suunto EON Core displays surface time since the previous dive and a countdown
time for recommended no-fly time. During the no-fly time, flying or traveling to higher altitude
should be avoided.
38