Suunto EON CORE 2.0 User Manual page 13

Table of Contents

Advertisement

Suunto EON Core
Warning
Dive time
Diluent high pO₂
Diluent low pO₂
Gas time
Safety stop broken
Tank pressure
Notifications indicate events that require preventive actions. Acknowledge the notification by
pressing any button.
Notification
CNS 80%
OTU 250
Change gas
Battery low
Recharge needed
Setpoint switched
Explanation
Dive time exceeds your dive time alarm limit
Diluent partial pressure of oxygen exceeds safe level
(>1.6); no immediate danger unless diluent is used, e.g.
diluent flush
Diluent partial pressure of oxygen below safe level
(<0.18); no immediate danger unless diluent is used, e.g.
diluent flush
Gas time exceeds your gas time alarm limit, or tank
pressure is below 35 bar (~510psi), in which case gas
time is zero.
Safety stop ceiling broken by more than 0.6 m (2 ft)
Tank pressure is below your tank pressure alarm limit.
Tank pressure is below your tank pressure alarm limit.
There is a built in 50-bar alarm that cannot be changed.
In addition to it there is a configurable tank pressure
alarm, you can set to any value and your dive computer
also shows an alarm when that value and 50 bar
pressures are reached. The tank pressure number is
forced onto the display and turns yellow after the value
you set and red after 50 bar.
Explanation
Central nervous system toxicity level at 80% limit
Approximately 80% of recommended daily limit for OTU
reached
On multi-gas dive when ascending, it is safe to switch to
next available gas for optimum decompression profile
Approximately three hours of dive time left
Approximately two hours of battery time left; re-charging
required before next dive
Setpoint switched automatically on rebreather dive. See
3.27.3. Setpoints
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents