Customize Dive Modes With Dm5 - Suunto EON CORE 2.0 User Manual

Suunto EON Core
1. Press the middle button to change to the compass view.
2. Hold your Suunto EON Core in level in front of you, with the top pointing in the direction to
your target.
3. Keep the lower button pressed until you see the Bearing locked notification.
Once you have a bearing locked, the lock position is indicated on the compass rose, as
shown below.
Below your heading (large number in center of compass), you also see the relative difference
between your bearing and your heading. So, for instance, when you want to travel in the
exact direction of your bearing, the lower number should be 0°.
If you want to set a new bearing lock, just repeat the same procedure above. Each bearing
lock is recorded in your dive log with a time stamp.
To clear the bearing lock from your compass view, you need to return to the surface.
To clear a bearing lock:
1. While in surface state, keep the middle button pressed to enter the main menu.
2. Scroll to General with the upper or lower buttons and press the middle button.
3. Press the middle button to enter Compass.
4. Select Clear bearing with the middle button.
5. Keep the middle button pressed to step back to dive screen.

3.9. Customize dive modes with DM5

You can customize Suunto EON Core views and features with Suunto DM5.
Watch the video on YouTube.
Customization is divided into four categories:
• Dive mode name
Dive algorithm
•
Gas settings
•
Customize views
•
Create up to 10 different dive modes with up to four custom views each.
Dive mode name has a 15-character limit, and you can select Suunto Fused™ RGBM 2 or no
algorithm for Dive algorithm.
For Gas settings, the GAS menu content can be configured.
For more details, see 4.7. How to customize dive modes with DM5.
18