Setting The Sample Rate; Setting The Safety Stops/Deep Stops - Suunto VYPER AIR User Manual

5.7.5. Setting the sample rate

The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
You can set the dive profile sample rate to 1, 10, 20, 30, or 60 seconds. The factory
default setting is 20 seconds.

5.7.6. Setting the Safety Stops/deep stops

In the AIR mode in the Deep Stops setting mode, the Deep stops can be set "ON" or
"OFF" depending on whether the Deep stops are used or not.
48
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.