Dive Planner; Flip Display; Gas Consumption - Suunto EON CORE 2.0 User Manual

Suunto EON Core
Tank Pressure - For more information on what is shown on the display, see 3.35. Tank
•
pressure .
NOTE: After diving in gauge mode, decompression calculation is locked for 48 hours. If
during this time you dive again, there is no decompression calculation available and Locked
is shown in decompression information fields.

3.17. Dive planner

The dive planner in Suunto EON Core helps you to quickly plan your next dive. The planner
displays available no decompression time and gas times for your dive based on depth, tank
size and gas consumption set.
The dive planner can also help you plan dives in series, taking into account the residual
nitrogen from your previous dive(s) based on the planned surface time you enter.
NOTE: It is important to adjust tank size, tank pressure and personal gas consumption
to get the gas calculations right.
See 4.6. How to plan a dive using the Dive planner for details on planning your dives.

3.18. Flip display

You can flip the display of Suunto EON Core to have the buttons on either the left or right side
of the dive computer, making it easier to wear on either arm.
Change the button orientation under General » Device settings » Flip display.
Select Buttons right to have the buttons on the right-hand side or Buttons left to have them
on the left-hand side.

3.19. Gas consumption

Gas consumption refers to your real-time consumption rate of gas during a dive. In other
words, it is the amount of gas a diver would use in one minute on the surface. This is
commonly known as your surface air consumption or SAC rate.
Gas consumption rate is measured in liters per minute (cubic feet per minute). This is an
optional field and needs to be added to your custom dive mode views in DM5. In the classic
view below, gas consumption rate is in the lower right-hand corner.
For enabling gas consumption metering, see 4.8. How to enable gas consumption metering.
28