Technical Specifications; Properties Of Your New Water Kettle; Temperature Control Functions - Gastroback Colour Vision Pro Operating Instructions Manual

TECHNICAL SPECIFICATIONS

Model:
Power supply:
Power consumption:
Length of power cord:
Weight:
Dimensions:
Capacity:
Temperature:
Certification:
These specifications may change without notice.

PROPERTIES OF YOUR NEW WATER KETTLE

Your new Water Kettle Colour Vision Pro is intended for heating up drinking water to a
selectable temperature in the range between 50°C to boiling temperature (100°C). The
selected temperature can be maintained for up to 30 minutes. Thereafter, the appliance
will shut-off the heating elements automatically.
IMPORTANT: Always close the lid for operation. With the lid open, the temperature
control and automatic shut-off will not work properly and there will be high energy loss.
IMPORTANT: Depending on the water hardness of your drinking water, the appliance
needs regular de-scaling (see: 'Care and Cleaning'). Otherwise, the temperature control
will not work properly, there will be an increasing energy loss, and overheating of the
heating elements could occur.

TEMPERATURE CONTROL FUNCTIONS

• If you wish to bring the water to the boil, press the ON/OFF button. Shortly after the
boiling temperature is reached, the heating elements will shut-off automatically and
the illumination of the kettle will go out. However, the actual water temperature will
still be indicated on the display.
• When starting the purify function instead, the kettle will boil the water for 3 minutes.
This way, you will get a purified, sterilized water.
• Additionally, the kettle can heat up the water to a selected temperature (see table
Art.-No.: 42427 Water Kettle Colour Vision Pro
220/240 V AC, 50/60 Hz
max. 2400 W
approx. 70 cm
approx. 1.2 kg
approx. 223 x 150 x 290 mm
(width x depth x height)
0.5 (MIN) to 1.5 litres (MAX)
variable from 50°C to 100°C
33