Entering The Password; Navigating The Smt Interface; Figure 263 Initial Screen; Figure 264 Password Screen - ZyXEL Communications 35 Series User Manual

Internet security appliance

Table of Contents

ZyWALL 5/35/70 Series User's Guide

32.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as

shown below.

For your first login, enter the default password "1234". As you type the password, the screen

displays an "X" for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your

ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,

press [ENTER] to bring up the login screen again.

The SMT is an interface that you use to configure your ZyWALL.

Several operations that you should be familiar with before you attempt to modify the

configuration are listed in the table below.

OPERATION KEYSTROKES

Move down to

another menu

Move up to a

initialize ch =0, ethernet address: 00:A0:C5:01:23:45

initialize ch =1, ethernet address: 00:A0:C5:01:23:46

initialize ch =2, ethernet address: 00:A0:C5:01:23:47

initialize ch =3, ethernet address: 00:A0:C5:01:23:48

initialize ch =4, ethernet address: 00:00:00:00:00:00

AUX port init . done

Modem init . inactive

Press ENTER to continue...

Enter Password : XXXX

To move forward to a submenu, type in the number of the desired

submenu and press [ENTER].

Press the [ESC] key to move back to the previous menu.

Chapter 32 Introducing the SMT

Table of Contents