Inserting A Name Server Record; Figure 202 System Dns: Insert Name Server Record; Table 148 System Dns: Add Address Record - ZyXEL Communications 35 Series User Manual

Internet security appliance

Table of Contents

ZyWALL 5/35/70 Series User's Guide

The following table describes the labels in this screen.

Enable Wildcard

26.6.2 Inserting a Name Server record

Click Insert in the System screen to insert a name server record.

Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a

host name and continues all the way up to the top-level domain name. For

example, www.zyxel.com.tw is a fully qualified domain name, where "www" is the

host, "zyxel" is the second-level domain, and "com.tw" is the top level domain.

If this entry is for one of the WAN ports on a ZyWALL with multiple WAN ports,

select WAN Interface and select WAN 1 or WAN 2 from the drop-down list box.

If this entry is for the WAN port on a ZyWALL with a single WAN port, select WAN

For entries that are not for the WAN port(s), select Custom and enter the IP

address of the host in dotted decimal notation.

Select the check box to enable DNS wildcard.

Click Apply to save your changes back to the ZyWALL.

Click Cancel to exit this screen without saving.

Chapter 26 DNS

Table of Contents