Back To Factory Defaults; Restart Screen; Figure 261 Reset Warning Message; Figure 262 Restart Screen - ZyXEL Communications 35 Series User Manual

Internet security appliance

Table of Contents

ZyWALL 5/35/70 Series User's Guide

31.11.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and

returns the ZyWALL to its factory defaults as shown on the screen. The following warning

screen will appear.

You can also press the RESET button on the rear panel to reset the factory defaults of your

ZyWALL. Refer to

System restart allows you to reboot the ZyWALL without turning the power off.

Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This

does not affect the ZyWALL's configuration.

Section 2.3 on page 67

for more information on the RESET button.

Chapter 31 Maintenance

Table of Contents