Chapter 27 Remote Management; Remote Management Overview; Remote Management Limitations - ZyXEL Communications 35 Series User Manual

This chapter provides information on the Remote Management screens.

27.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See
page 214
You may manage your ZyWALL from a remote location via:
• Internet (WAN only)
• LAN only,
• WLAN only,
Note: When you choose DMZ only, WAN only, WLAN only or ALL (LAN & WAN&
DMZ& WLAN), you still need to configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyWALL
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
3 Telnet
4 HTTPS and HTTP

27.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

Chapter 27 Remote Management

C
Remote Management
for details on configuring firewall rules.
ZyWALL 5/35/70 Series User's Guide
H A P T E R
• ALL (LAN&WAN&DMZ&WLAN)
• DMZ only,
• Neither (Disable).
2 7
Chapter 11 on
432