Table of Contents
Advertisement
ZyWALL 5/35/70 Series User's Guide
The following wireless LAN security fields become available when you select 802.1x + No
WEP in the Security drop down list-box.
Table 60 Wireless Card: 802.1x + No WEP
LABEL
Security
ReAuthentication
Timer (Seconds)
Idle Timeout
(Seconds)
Authentication
Databases
Apply
Reset
9.16.7 No Access 802.1x + Static WEP
Click the NETWORK and WIRELESS CARD to display the Wireless Card screen. Select
No Access 802.1x + Static WEP to deny all wireless stations access to your wired network
and allow wireless stations to communicate with the ZyWALL using static WEP keys for data
encryption.
Figure 87 Wireless Card: No Access 802.1x + Static WEP
199
DESCRIPTION
Select 802.1x + No WEP from the drop-down list.
Specify how often wireless stations have to resend user names and passwords in
order to stay connected. Enter a time interval between 10 and 65535 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the user name and
password again before access to the wired network is allowed.
Click Local User to go to the Local User Database screen where you can view and/
or edit the list of users and passwords. Click RADIUS to go to the RADIUS screen
where you can configure the ZyWALL to check an external RADIUS server.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 9 Wireless LAN
Advertisement
Chapters
Table of Contents
Troubleshooting
