ZyXEL Communications Prestige 2304R-P1 Support Notes page 58

Configure parameters that determine when Prestige will forward WAN traffic to the backup gateway using
SMT Menu 11.6-Traffic Redirect Setup.
Menu 11.1 - Remote Node Profile
Active= Yes
Configuration:
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Active Press [Space BAR] and select Yes (to enable) or No (to disable) traffic redirect setup.
Backup
The IP address of your backup gateway. Prestige automatically forwards outgoing traffic
Gateway IP
to this IP address if Prestige's Internet connection terminates.
Address
Enter a number from 1 to 15 to give your traffic redirect route a priority number. The
Metric
smaller the number, the higher priority the route has.
Configure a reliable server on Internet (for example, your ISP's DNS server address) for
Check WAN IP
Prestige to check it's WAN connectivity periodically. If you leave this field as 0.0.0.0,
Address
Prestige will check it's default gateway IP address instead.
Specify the number of times your Prestige may attempt and fail to connect to Internet
Fail Tolerance
before triggering traffic redirect connection.
Period Specify the period that Prestige would check it's WAN connectivity.
Timeout Specify the seconds that Prestige would wait for a response from the reliable server.
Menu 11.6 - Traffic Redirect Setup
Backup Gateway IP Address= 192.168.1.50
Metric= 14
Check WAN IP Address= 202.13.154.1
Fail Tolerance= 5
Period(sec)= 30
Timeout(sec)= 3
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2304 Support Notes
58