Phone Book Speed Dial - ZyXEL Communications Prestige 2304R-P1 Support Notes

Settings
Use this field to set the loudness that the Prestige uses for the speech signal
Speaking
Volume that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Use this field to set the loudness that the Prestige uses for the speech signal
Listening
that it receives from the peer device and sends to your phone. -1 is the
Volume
quietest and 1 is the loudest.
Outgoing SIP 1 and SIP 2 correspond to the Prestige's SIP accounts. Select whether
Call use you want the phone(s) attached to this phone port to use SIP account 1, 2 or
both when you make a call. If you select both SIP accounts, the Prestige will
first try to use SIP account 2 and then SIP account 1 when you make a call.
G.168 Active Select this check box to cancel the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Select this check box to use Voice Activity Detection (VAD) to reduce the
VAD
bandwidth that a call uses. The Prestige will generate and send comfort
Support
noise when you are not talking.
When you are dialing a telephone number the Prestige waits this long after
Dialing you stop pressing the buttons before initiating the call. Select how many
Interval seconds you want the Prestige to wait after the last input on the telephone's
keypad before dialing (making) a call.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.

Phone book Speed dial

Prestige allows you to configure up to 10 SIP numbers in the phone book for speed dial.
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2304 Support Notes
72