Faq; System Faq; What"S The Embedded Web Configurator; How Do I Access The P-660Hnu-Tx Command Line Interface (Cli) - ZyXEL Communications P-660HNU-Tx Support Notes

P-660hnu series wireless n adsl2+ 4-port gateway with usb
Hide thumbs Also See for P-660HNU-Tx:
Table of Contents

Advertisement

FAQ

System FAQ

1. What‟s the Embedded Web Configurator?
The web configurator is an HTML-based management interface that allows
easy device setup and management via Internet browser.

2. How do I access the P-660HNU-Tx Command Line Interface (CLI)?

The Command Line Interface is for the Administrator use only, and it could be
accessed via telnet session.
Note: It is protected by super password, admin/1234 by factory default.

3. How do I update the firmware and configuration file?

You can do this if you access the P-660HNU-Tx (x here stands for 1 or 3) as
Administrator. You can upload the firmware and configuration file to Prestige
from Web Configurator.
upgraded from Web Configurator. In this case, ZyXEL will prepare
special Upload Software for you. Please read the firmware release note
carefully when you want to upload a new firmware.

4. How do I upgrade the firmware by using Web configurator?

The P-660HNU-Tx allows you to transfer the firmware to P-660HNU-Tx using
Web Configurator. The procedure for uploading firmware via Web Configurator
is as follows.
a. Type „http://192.168.1.1‟ in the web browser URL box in your PC to
login to your P-660HNU-Tx.
Note: The factory default LAN IP is 192.168.1.1.
b. Login with the administrator account. admin/1234 by default.
All contents copyright © 2011 ZyXEL Communications Corporation.
Note: There may be firmware that could not be
P-660HNU Series Support Notes
6

Advertisement

Table of Contents
loading

Table of Contents