Advertisement
Quick Links
Advertisement
Related Manuals for Kamstrup 382
Summary of Contents for Kamstrup 382
- Page 1 Manual Kamstrup 382 www.kamstrup.com...
- Page 2 Operating instructions Connect the meter in accordance with the installation diagram on the meter’s type label. Depending on the configuration a fixed value will be displayed, or the display will change between selected indications every 10 seconds. It is possible to change the display reading manually by activating the push button on the meter.
- Page 3 LCD display The phase indications (L1, L2 and L3) have various functions. They indicate the two situations described below. From reset (voltage cut-off) of meter and 4 hours ahead: Indications L1, L2, L3 Indicate Voltage is above minimum limit (160V), and load is above minimum limit (2.3W).
- Page 4 Please see current documentation on available antennas. Mounting a communication module in the meter may influence communication, please contact Kamstrup. With disconnection function With this type of meter, it must be checked that the red/green diode is not switched on.