Adding A New Profile; Table 11 Profile Screen - ZyXEL Communications ZyXEL ZyAIR G-260 User Manual

ZyXEL G-260 User's Guide
The following table describes the labels in this screen.

Table 11 Profile Screen

LABEL
Profile List
,
,
or
Profile Name
SSID
Connect
Add
Delete
Edit
Profile Info
Network Type
SSID
Channel
Security
Transfer Rate

3.3.1 Adding a New Profile

Follow the steps below to add a new profile.
1 Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
43
DESCRIPTION
Click a column heading to sort the entries.
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless
security is deactivated.
This is the name of the pre-configured profile.
This is the SSID of the wireless network to which the selected profile associate.
To use a previously saved network profile, select a pre-configured profile name in
the table and click Connect.
To add a new profile into the table, click Add.
To delete an existing wireless network configuration, select a profile in the table
and click Delete.
To edit an existing wireless network configuration, select a profile in the table and
click Edit.
The following fields display detail information of the selected profile in the Profile
List table.
This field displays the network type (Infrastructure or Ad Hoc) of the profile.
This field displays the SSID (Service Set IDentifier) of the profile.
This field displays the channel number used by the profile.
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (Disabled).
This field displays the transfer speed of the selected profile in megabits per second
(Mbps).
Chapter 3 ZyXEL Utility Configuration