Table 14 Adapter - ZyXEL Communications ZyXEL ZyAIR G-260 User Manual

The following table describes the labels in this screen.

Table 14 Adapter

LABEL
Adapter
Transfer Rate
Preamble Type
Power Saving
Mode
OTIST (One-
Touch Intelligent
Security)
Setup Key
Save
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
Select a transfer speed from the drop-down list box. Choose from Fully Auto
(default), 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24
Mbps, 36 Mbps, 48 Mbps, and 54 Mbps.
Select a preamble type. Choices are Long, Short and Auto.The default setting is
Long.
Refer to Section 2.4 on page 28
Select Maximum Power Save or Fast Power Save to save power (especially for
notebook computers). This forces the ZyXEL G-260 to go to sleep mode when it is
not transmitting data.
When you select Continuous Access Mode, the ZyXEL G-260 will never go to
sleep mode.
Select this check box to enable auto security.
Enter the same setup key (up to eight printable characters) as the ZyXEL AP or
wireless router to which you want to associate. The default OTIST setup key is
"01234567".
Note: If you change the OTIST setup key on the ZyXEL AP or
wireless router, you must also make the same change here.
Click Save to save the changes back to the ZyXEL G-260 and return to the Link
Info screen.
ZyXEL G-260 User's Guide
for more information.
48