Storing - Westfalia 58 75 76 Instruction Manual

 In order to replace an empty bottle, unscrew it quickly from the
gun. Clean at once the adapter (and the valve of the bottle, if it is
not quite empty and meant to be used again) with the appropriate
cleaner. Screw the cleaner container to the cartridge holder and
spray until the gun is completely clean (figure c). The cartridge
holder, the nozzle and the spray pipe must always be clean and
the appropriate cleaner must always be used for the gun. The
gun seals tight, so that once the bottle has been screwed into
place, the product contained does not dry up.
 Clean the gun thoroughly if you do not intend to use it for some
time.
 When changing the viscosity, it may be that foam is released
from the needle packing adjusting screw. In this case, clean the
parts at once off any foam and turn the screw of the spray pipe
clockwise with an M8 spanner. This seals the (P.T.F.E.) packing
in the gun and prevents issue of foam, At the same time also that
closing needle moves freely, if necessary by lubricating it where it
joins the screw and packing.
 In order to keep the gun in proper working order, follow the
instructions for use and maintenance described above and han-
dle the gun with care.

Storing

 Store the unit indoors in a dry place that is protected from dust,
dirt and extreme temperatures.
 Keep the unit out of reach of children and persons in need of
supervision.
Troubleshooting
10